Search results for: 2017
Sponsored by
Module 120: Assessing co-heating tests – a tool to reduce the building performance gap
This module looks at a project designed to assess the practical reliability of the current application of co-heating tests to…
November 2017
Heating
Sponsored by
Module 119: Developments in non-residential mechanical ventilation and heat recovery
This module explores how modern packaged MVHR can deliver multi-mode tempered ventilation with increased efficiency and good air…
November 2017
Ventilation
Sponsored by
Module 118: Right-sizing brazed plate heat exchangers
This module considers the factors involved in the selection of brazed plate heat exchangers to ensure the most…
November 2017
Heating
Sponsored by
Module 117: Cost and carbon-effective small-scale CHP
This module considers the factors involved in assessing the viability for small-scale combined heat and power (CHP) solutions…
November 2017
CHP
Module 116: CIBSE guidance for delivering good IAQ in the built environment
This module gives an overview of how ventilation to improve indoor air quality (IAQ) is covered specifically in…
September 2017
Health & wellbeing
Sponsored by
Module 115: Assessing life-cycle costs of delivering domestic hot water in commercial applications
This module expands on previous CPDs, with a more extensive example of how net present value analysis can…
August 2017
Domestic hot water
Sponsored by
Module 114: Employing distributed mini heat pumps with a shared ground loop in social housing
How the use of mini heat pumps by apartments in social housing schemes that share a common ground…
July 2017
Sponsored by
Module 113: Determining thermal comfort in naturally conditioned buildings
This module considers newer methods of assessing the comfort of occupants in naturally conditioned buildings, and explores how…
June 2017
Cooling
Sponsored by
Module 112: The application of alternative refrigerants to meet F-gas requirements
This module considers alternative solutions to using hydrofluorocarbons (HFCs) in order to comply with the EU F-gas Regulation…
June 2017
Cooling
Sponsored by
Module 111: Safe and effective systems for the supply of potable water in buildings
This module looks at solutions for effectively delivering potable water to new and existing buildings, and explores the…
May 2017
Pipework
Sponsored by
Module 110: Meeting the growing demand for domestic hot water with efficient, controllable systems
This module examines the evolving standards that are setting the requirements for hot-water generation and considers how continuous-flow,…
March 2017
Heating
Module 109: Evaporative cooling for building environmental systems
This module considers the evaporative cooling process and its application as a low-cost means of reducing temperature in…
March 2017
Cooling
Sponsored by
Module 108: Applying plate heat exchangers to integrate high-efficiency boilers into legacy systems
This module looks at different types of plate heat exchangers used in building services systems, and how they…
February 2017
Heating
Sponsored by
Module 107: Predicting and delivering good building IAQ using natural ventilation
This CPD module explores how natural ventilation can be used to maintain indoor air quality, and its application…
January 2017
Ventilation